Hydromet Data Logger & Controller–Model AT3512-00

 

The Hydromet Data Logger & Controller – Model AT3512-00 is a powerful and flexible addition to the 3306 family of transmitter products designed with the field technician in mind. It can be used as a simple data logger and in more complex control systems. The Model accepts up to 8 Analog (plus internal battery), up to 2 shaft encoders, up to 2 precipitation, SDI-12, wind speed, wind direction, and peak gust.

Additional Hydromet Data Logger & Controller features include fuse protection on the solar power input, battery and 12V switched to avoid damage to the unit through shorting (these fuses automatically reset when they cool off); and a dedicated USB port for programming, data retrieval, and uploading of new firmware versions.
You can use the included Insight software for fast, easy set-up of the Model AT3512 from either a desktop or laptop computer in the field. The AT3512 internal firmware is upgradable in the field. New firmware versions can be downloaded via the USB cable in just a few seconds.

 

● 8 Analog inputs
● 5 Digital inputs, including SDI-12
● HSE Insight software app included for easy field setup and configuration
● Fuse protection on solar panel, battery, 12V switched
● 16 GB of removable memory

 

 

Sensor Inputs	8 Analog 0 to 5V, digital inputs including SDI - 12, up to 2 Up - Only Counters, up to 2 Shaft Encoders, Wind Run, ALERT Wind Format, and Peak Wind Gust
Total Sensors	Up to 50
Analog Sensor Resolution	12 bits (0.0012 V)
Output Channels	4 digital outputs, open drain FET, active low
Output Channel Electrical	750 mA max, 20 VDC max
Output Channel Configuration	Continuous or pulsed, 1 to 65535 second increments ret riggerable by external command
Local Output Channel	Up to 5 sensors associated with one or more output channels, configurable. Voting mode available, requires a majority of sensors to exceed threshold prior to activating output
Remote Output Channel	Status message from base station activating specified output
Control Inputs	-
Communication Protocol	11 bit status messages, two - way command/status sequences using ALERT protocol
Remote Controller Management	Up to 16 remotes for each control channels (32 Max)
Sampling Interval	0 seconds to 18 hrs, programmable
Reporting Interval	Time-defined and/or event and integration
Event Threshold Interval	0 seconds to 9952.5 hrs, programmable
Reporting Override Value	0 to 65535 counts
Holdoff Interval	0 to 65535 counts
Data Logging Modes	Time - defined and/or on transmission
Data Logging Interval	0 seconds to 9952.5 hrs, programmable
Data Format	ALERT Binary Standard
Recorded Data	0 to 2047
Record rate	8 bytes/second, 1 file per month per sensor
Record size	16 GB SD card, removable
Real Time Clock	Clock/Calendar with on - board battery back - up with leap year correction
Logging Memory	0 to 8191, programmable
ID Number Range	1 character
SDI - 12 Address	1 character
Analog Sensor Warmup	0 to 255 seconds
Programmable Parameter Precision	1 digit specifying number of decimal places to convert
Address Programmable Parameter	IEEE 754, 32 bit float
Multiplier Programmable Parameter	IEEE 754, 32 bit float
Base Set Programmable Parameter	0 to 65535 seconds, for Counters, Shaft Encoders, Wind Run, and ALERT Wind power
Shaft Encoder Parameters	Supports Quadrature format and Sierra Misco format. Supports reversing direction & pulsed or continuous
Live Sensor Reading	Yes, from user interface
Low Battery Holdoff	-
Programming	Included Insight Software (Windows GUI)
Operating Voltage	12 VDC
Current Draw	-
Connectors	Terminal strip
Lightning Protection	Standard on ALL inputs.
Chassis	Aluminum
Temperature Range	-58 to 168 °F (-50 to 70 °C)
Operating Temperature	-40 to 160 °F (-40 to 60 °C)
Dimensions	6 x 7.5 x 1 in (15.2 x 19 x 2.54 cm)
Weight	0.5 lbs (227 g)
Shipping Weight	1 lbs (0.5 kg)