Clamp Connection Sanitary Pressure Sensor

 

Sanitary Pressure Sensor is a type of pressure sensing device that is specifically designed for use in sanitary environments. Such as food processing plants, pharmaceutical manufacturing facilities, and hospitals.  Clamp Connection Sanitary Pressure Sensor is equipped with a clamp connection, which allows for easy installation and maintenance without the need to disassemble the entire system.

The sensor is typically made from high-grade stainless steel and other corrosion-resistant materials to withstand the harsh conditions found in these types of environments. It is also designed to meet various industry standards, to ensure that it is safe and hygienic for use in these applications. The Clamp Connection Sanitary Pressure Sensor is an important tool for monitoring and controlling pressure levels. in sanitary environments.

 

●Wide measuring range;

●Hygienic structure, no dead angle, anti-clogging;

●Protection class IP65;

●Various output signal forms, adjustable and displayed on site;

●Reverse polarity protection and instantaneous overcurrent and overvoltage protection, in line with EMI protection requirements;

●Clean flat isolation diaphragm, in line with 3A hygiene standard;

●Adopt diffused silicon pressuresensor, no pressure hole, no cavity planar structure;

●Various signal output forms, voltage, current, frequency signals, etc.;

●High precision, high strength, hygienic, anti-fouling;

 

 

Item	Specification
Measuring range	Relative pressure: maximum 0 ~ 7MPa, minimum 0 ~ 5KPa, customized up to 100MPa
	Absolute pressure: Maximum 0～60MPa; Minimum 0～20KPa
	Negative relative pressure: -1KPa～-0.1MPa
Accuracy class	±0.5%F.S
Temperature effect	Tk≤±0.02%FS/K
Stability	Better than 0.1%FS/year
Location effect	Mounting position does not affect zero point
Permissible temperature	Medium temperature: -20～80℃, -40～200℃
	Ambient temperature: -30～80℃
	Storage temperature: -30～80℃
Protection class	IP64, IP65
Adjustment range	Zero adjustment range ±5%
	Full scale adjustment range ±20%
Power supply	16～32VDC
Output signal	4～20mA DC (analog, two-wire system)
	1～5V DC (analog, three-wire system)
Wiring lead-out method	It can be drawn out from any outlet according to the needs. It is recommended to use a minimum of φ7.5 industrial cable as the lead for sealing. The lead-out connector is a general cable connector M12×1.5, and the end without the lead is sealed with an end cover
Pressure interface	Stainless steel clamp type; thread M27×1.5, G1/2, G3/4, NPT1/2,

 

Order Guide

ATECH	Clamp Connection Sanitary Pressure Sensor
Code	Pressure Range
(0~X)KPa	-100kPa…0-0.01…100MPa
Code	Output Signal
B1	4-20mA
B3	0-10v
B4	0-5V
B5	1-5V
Code	Process Connection
K1	2 inch clamp connection
K2	2.5 inch clamp connection
P	Specify thread size
Code	Electrical connections
C1	Hirschman joint
C2	Cable output
C3	Aviation connector
Code	Structure Material
	Diaphragm	Interface	Shell
M1	316L	Stainless steel	Stainless steel
M3	Tantalum	customize	customize
M4	Hastelloy C	customize	customize
Code	Additional functions
G	Gauge pressure (default)
A	Absolute pressure
S	Sealed gauge pressure
D1	Local display
Y2	Blue protective shell
T	High temperature -XX℃